Torque Meter PCE-FB 5TW

Torque wrench PCE-FB 5TW 

torque meter up to 5 Nm / external square female torque sensor 1/4" /

graphical display / PEAK function / max. 1000 Hz / USB interface / software included

The torque meter PCE-FB 5TW can measure, depending on the sensor, up to 5 Nm. Thanks to its evaluation electronics, the torque meter achieves an uncertainty of only 0.5% of the measurement range. The torque meter has a 1/4" female square sensor. The torque meter consists of a gauge and an external sensor connected by cable, allowing for comfortable operation. You can rotate the torque sensors in both directions. The torque meter can provide an acoustic alert when it reaches a certain predefined value. The torque meter displays the peak value (PEAK) as well as the force development. It also offers the possibility of analyzing the force development. You can store the measurement values on an SD card and evaluate such values on the device or PC. The torque meter software is included in the shipment.

- Portable torque wrench

- Measurement range up to 5 Nm

- Error tolerance: max. 0,5 % of the range

- Measurement rate adjustment up to 1000 Hz

- PEAK function (MIN / MAX)

- Limit value function / Value comparison

- Square female sensor of 1/4"

- Statistical and graphical analysis

- Graphical display with automatic rotation

- Menu: German, English, Spanish

- Includes analysis software

- USB and RS-232 interface 

- Overload protection: max. 50% of range

- Power supply: accumulator or mains

Technical specifications

Model

PCE-FB 5TW

Range / Resolution

5 Nm (0,5 kgf-m)  /  0,001 Nm

Incertidumbre

±0.5 % of the measurement range

Unidades

Nm, Ncm, kgf-m, lbf-in, gf-m

Maximum overload

50% of the measurement range

Measurement share

Free adjustment up to a maximum of 1,000 values/s

Funciones

PEAK (MIN - MAX Hold) 

Measurement with limit values activated

Real-time measurement via software

Pantalla

Graphical LCD display 61 x 34 mm

Automatic screen rotation

Backlighting

Menu

Multilingual: German / English / Spanish

Memoria

Internal memory and SD memory card

(The internal memory is limited to a series of 6,400 measurements)

Registro

Manual: Pressing a button

Automatic: free adjustment

Interfaz

USB and RS-232, 9 pins



Optional: Switched contact output 

MIN / MAX / OK (see below) + 1 input

Software

Includes software for evaluation and control

Condiciones ambientales

-10 ... +40 °C

Power supply

4 x acumulador AA Ni-MH 2700 mAh AA 

Power adapter ~230 V/12 V; 1.2 A 

Automatic shutdown function adjustment

Accumulator operating time

Aprox. 20 h 

(Backlight off: approx. 45 h)

Measured dimensions

210 x 110 x 40 mm / 600 g

Dimensions of the torque wrench

Up to 10 Nm Ø90 (Ø40) / 80 mm / 700 g

From 10 Nm 1500 g Ø75 / 90 mm / 1500 g

Cable length to the sensor

Aprox. 2 m

The shipping content of the PCE-FB TW torque meter includes software. You can read measurement values or control the torque meter. The measurement performed with the torque meter shows the limit values on the left and right. At the bottom, you will find a statistical analysis of the measurement, MIN / MAX values, etc.

Contents of the shipment

1 x Torque wrench PCE-FB 5TW

1 x External torque sensor

1 x Software with RS-232 data cable 

1 x SD memory card

1 x Power supply

1 x Case