You are here

Surface Tester

Porosity Tester Meter S3002
$ 1,200.00
  • Brand: PAINT TEST E.
  • Model:S3002
  • Measurements: 300 μm
  • 500 μm
  • 500 μm
  • Origin: Germany

 

El The low voltage porosity tester is a handy, mains-independent tester for locating pores and specific defects in electrically insulating layers on metallic base materials. The low voltage porosity tester works with the wet sponge method. With a wet sponge, a defined tension is applied to a coating to be tested. The conductive base is connected to the porosity tester through a measurement cable. ...
 

 
Porosity Tester Meter S4002
$ 3,050.00
  • Brand: PAINT TEST E.
  • Model:S4002 
  • Range: 1...20 kV
  • Medidas: 3700 μm
  • Origin: Germany

 

El  Pore measurement detection method (Holitech), which applies a pulse voltage to check that coatings are free of pores, has been shown to be a reliable method. Thanks to the many advantages of this technique, the porosity tester is a very valuable piece of equipment in passive corrosion protection and industrial quality control. The porosity tester (Holiday-Detector, Pinhole Tester) detects and recognizes faults, defects and deficiencies in isolated layers on conductive substrates. . ...
 

 
Surface Tester PCE-CT 25
$ 299.00
  • Brand: PCE
  • Model:PCE-CT 25 
  • Range: 0 ... 1000 µm 
  • Resolution: 1μm
  • Origin: Germany

 

El   PCE-CT 25 layer surface tester is used for the rapid detection of the thickness of all types of coatings (lacquers, paints, plastics, ...) on steel and iron (F), as well as on non-ferrous metals (N) in the automotive sector. ...
 

 
Surface Tester PCE-CRC 10
$ 440.00
  • Brand: PCE
  • Model: PCE-CRC 10 
  • Range: 0 ... 1000 µm 
  • Resolution: 1μm
  • Origin: Germany

 

El  PCE-CRC 10 surface tester has been designed to check the quality of coating adhesion. You can use the surface tester on any type of surface with thin, thick or hard coatings. The adhesion of lacquers and other coatings is a production and quality characteristic that determines their protective effect.r....
 

 
Surface Tester PCE-CWM 20
$ 2,150.00
  • Brand: PCE
  • Model: PCE-CWM 20
  • Range: 0 ... 8 mm 
  • Resolution: 0.02mm
  • Origin: Germany

 

El  PCE-CWM 20 surface tester is a meter to determine the width of cracks in different materials. The surface tester can be used to measure cracks and fissures in bridges, tunnels, buildings, concrete decks or metal surfaces. The delivery includes a handheld device and a microscopic magnification sensor with a 1 meter connection cable. ...
 

Â