Tensile, Compression, and Bending Test Stand PCE-UTU 50

Nota: This is just an example of the PCE-UTU 50 configuration. Depending on your application, you may need additional special mounting devices. Please contact us before placing an order for advice. We will establish the configuration tailored to your needs. Please note that you must add the costs of assembly and training.

Force testing station PCE-UTU 50

Force test stand for tensile testing / stress-strain diagram preparation / different versions / regulated DC motor / break detection / variable test speed / force control / complex configuration options.

The force testing station is suitable as a device for tensile testing. Therefore, it is used with the help of a force testing station, a standardized method for determining material characteristics, such as determining the yield point, tensile strength, elongation at break, and other characteristics by applying the force testing station. 

As previously mentioned, the tensile test is a standardized and destructive procedure used for material examination, using standardized samples with a defined cross-sectional area subjected to extended force and fracture.

The expansion of samples using the force testing station is carried out without impacts and with a regular force increase. The force testing station offers the possibility to determine the yield limit, tensile strength, and elongation at break of the tensile sample among others. After measurement, the force testing station sends detailed results, which are transferred to the software as a stress-strain diagram. In this diagram, the obtained values as well as the characteristic magnitudes of the materials are clearly read. 

- Measurement range: 1 ... 50 kN

- Precision class: 0.5

- Diferentes versiones

- Motor DC regulado

- Variable test speed

- Housing components coated with

   powder coating

- Break detection

- Maximum value memory

General technical specifications

PCE-UTU 50 force testing station

 

Carga nominal

50 kN

Precision classes

0.5 / EN 7500-1

Tension

Regulated DC motor

Test speed

0,001 ... 500 mm/min, Resolution: 1 µm

Desplazamiento

Incremental

Standard stroke

1000 mm (without clamping device and clamping adapter)

Power supply

230 V AC, 50 Hz

Estructura

2 polished guide columns.

2 ball screws

Column coating with bellows closure

Limit switch for stroke limitation

Powder-coated housing components

Color: RAL 7035

Safety installation

Polycarbonate cover

Safety contact

Dimensions

1370 x 650 x 530 mm

Peso

Aprox. 180 kg

Egeneral technical specifications of the force sensor for UPM

Installed under the mobile crossbeam for compression and tension forces. Includes mounting material, plug, power outlet, and wiring.

Measurement range

1 ... 50 kN

Nominal characteristic value

2 mV/V

Relative deviation of the characteristic value

≤ ±0,1 %

Relative linearity deviation

≤ ± 0,02 %

Relative slip error

≤ ±0.03 % after 30 min.

≤ ±0.07 % after 8 h

Normativa

According to EN ISO 7500-1, class 0.5

Sobrecargarga

50 %

Type of protection

IP 67

TEDS module

Integrated, according to IEEE 1451-4, 

automatic sensor detection

Technical specifications of the control and electronic evaluation system

Data measurement capture

1 kHz

Pantalla

LCD screen

Interfaz

RS-232

Funciones

Force regulation

Displacement regulation

Posicionamiento manual

Execution of a programmed sequence

Specification of the crossbeam speed

Return to the initial position

Ciclos

Specification of the limit value for force / displacement / time

Reset of force / displacement indicator to 0

Adjustable regulation factor

Breakage detection

Maximum value recording

with 2. force sensors: choice of working area

Smart electronics for measurement and regulation

Procesador

32-bit RISC architecture

Control loop

> 1 kHz

TEDS module

Automatic sensor detection 

IEEE Standard 1451-4

Interfaz

USB 2.0

Transductor A/D

2 x 24 bit A/D for DMS sensor

Sampling rate: > 50 kHz

2 x 10 bit A/D for additional signal processing

Sampling rate: > 50 kHz

1 x signal input for distance and angle measurement

Software

Funciones

- Tools for free programming of

  check sequences

- Tools for free programming of

  calculations

- Free configuration of a time graph

   real with superposition of several axes, scale

   free and manual analysis function

- Free configuration of the report format with

   inclusion of image files

- Individual or sequential logging, or export

  from test developments, results of

  calculations and raw measurement values

- Integrated user management

- Automatizable

- Suitable for networks

- Multilingüe

- License per machine, multi-workplace

Basic setup for material inspection

1 x Template for tensile tests

1 x Compression test template,

curvature or alternating loads

1 x Template for tensile and compression spring tests

Contents of the shipment

 

1 x PCE-UTU 50 test stand

1 x Force sensor (includes mounting material, connector, plug, and wiring)

1 x Control and analysis electronics

1 x Smart measurement and regulation technique (includes Slave module)

1 x Software

1 x User manual