Tachometer Nova Strobe dbl Kit

Portable tachometer with Nova Strobe dbl accumulator for mobile use

The portable Nova Strobe dbl tachometer is used to measure revolutions and oscillations, and to observe movements. The ergonomic design and lightweight of this portable tachometer allow measurement even in hard-to-reach places. The flash frequency is adjusted via a rotary knob or by pressing keys. Such values are displayed on the screen. The tachometer additionally has a trigger input and output, allowing for external synchronization or triggering. The device is powered by a rechargeable internal battery.

- Handheld device

- Optical measurement

- Entrada disparo (trigger)

- Frequency range: 30 ... 500,000 flashes per minute

- Possibility of external triggering and selectable edge synchronization/adjustment

- LCD screen with backlighting

- Up to 10 hours of power from the accumulator

Technical specifications

Pantalla

LCD display with backlight

Manejo

12 keys on the front, an LCD screen, and a side rotary button

Dynamic rotary button

The button with an incremental switch adjusts the flash frequency

Frequency range

30 ... 500.000 FPM (0,5 ... 8.333,33 Hz)

Flash frequency resolution: 0.01 FPM

Accuracy: 0.002% of the setting or ± last digit

Frequency adjustment via rotary knob, key, or external trigger signal

Tachometer

Indication of revolutions with external trigger: 0 ... 500,000 rpm

Accuracy: ±0.001 % of the indication or 

± last digit

Flash duration

Adjustable up to max. 14 degrees/3,000 μs

Memoria

Stores the last frequency. Additionally, 6 different frequencies can be stored.

Flash energy

typical 3,000 lux with a frequency of 6,000 flashes per minute. Color temperature of 6,300 ºK

Fuente luminosa

12 maximum performance LEDs, adjustable clarity

Tiempo operativo

Battery capacity: 8 ... 10 hours 

a 1.800 FPM.

Power supply

6 VDC via rechargeable internal NiMH battery. Power supply via mains component

Trigger output

Enables synchronization with other devices

Connection via 2-pole 3.5 mm Jack connectors. The output is TTL compatible and corresponds to the flash frequency of the tachometer. You can select the edge (rising or falling).

Entrada disparo

Enables external triggering of the tachometer.

The connection is made via a 3.5 mm 3-pole Jack connector. The input is compatible with TTL (maximum 24 V).

Minimum trigger pulse width: 500 ns

The internal oscillator and the rotary button for frequency adjustment are disabled while the jack connector is plugged in.

Dimensions

Carcasa: 93 x 90 x 229 mm

Reflector housing: diameter of 122 mm

Handle: 108 mm in length

Peso

Aprox. 860 g

Temperatura operativa

0 ... +40 °C

Contents of the shipment

1 x Nova Strobe Tachometer dbl

1 x Network component

1 x Case