Tachometer C.A. 1727

Tachometer C.A. 1727 

User-friendly with numerous measurement possibilities and software

The tachometer C.A. 1727 allows the measurement of revolutions in three different ways. In addition to contact measurement via a mechanical cam, the tachometer offers the possibility of non-contact measurement through a modulated infrared signal and reflective bands on the object to be measured. An external measurement input on the tachometer allows the connection of the signal generator. The measured values are displayed on a large LCD screen. It also integrates memory and software for data processing on a PC.

- Revolution measurements up to 100,000 r.p.m.

- Measurements with or without contact

- Large LCD display with analog bar graph

- USB port for transmitting measurement values to a PC

- Tachograph software for analysis and processing of measurement values on the PC

- Memory for 4,000 points, extensive programming possibilities

- Numerous functions, memories, and automation to facilitate information gathering: 

  measurement of rotational speed, linear speed, counter, frequency, and period

- Adjustable limit values

- Counter function 

- Min. and max. functions.

- HOLD function to freeze measurement values on the screen

- SMOOTH function to filter the measurement; averages the last 10 measurements

- Robust transport case

Technical specifications

Technical data

Function RPM

(revolutions per minute)

Range: 60 a 100.000 r.p.m.

Resolution: 0.0006 to 6 according to range 

Accuracy: 1.10^-4 reading ± 6 digits

Function m/min

(velocidad lineal)

Range: 0,1 a 10.000 m/min

Resolution: 0.0006 to 6 according to range 

Accuracy: 1.10^-4 of the reading ± 1 step

Hz function

(frecuencia)

Range: 0,1 a 10.000 Hz

Resolution: 0.0004 to 0.4 depending on range 

Accuracy: 4.10^-5 of the reading ± 4 digits

ms function

(signal duration)

Range: 0,1 a 10.000 ms

Resolution: 0.0003 to 0.3 depending on range 

Accuracy: 1.10^-4 reading ± 5 digits

Duty cycle

Range: 10 a 10.000 %

Resolution: 0.1 to 1% depending on range 

Accuracy: 0.1% of the scale from 0.2 Hz to 50 Hz; 0.2% of the scale from 50 Hz to 125 Hz; 

1% in other cases

General technical specifications

Power supply

9 V battery

Battery life

250 measurements of 5 min with optical sensor

600 measurements of 5 min with external sensor

Dimensions

216 x 72 x 47 mm

Peso

250 g

Type of protection

IP 51

Condiciones ambientales

Almacenamiento: -20 ... +70 °C a 95 % H.r.

Funcionamiento: 0 ... +55 °C a 90 % H.r.

Sensor features

Sensor infrarrojo

Dimensions of the reflective bands

10 to 90% of the object's surface

Measurement distance

1 to 50 cm. The maximum distance is given by a reflective adhesive tape with a minimum surface area of 10 cm².

Measurement angle

max. ± 15° with respect to the perpendicular of the reflective surface

Mechanical sensor

Mechanical revolution sensor

Head: elastomer with a Shore hardness of 80

Pressure applied to the moving part: 

between 2 and 40 N

Maximum speed: 10,000 rpm

Lifespan: approx. 1,000 hours at 3,000 rpm at a pressure of 20 N

Conical head

Minimum diameter of the shaft to be measured: 5 mm

Cylindrical head

Measurement of transmission shaft speed with a diameter greater than 5 mm, or flat end

Odometer

Wheel diameter: 31.83 mm

Wheel development: 10 cm ± 0.1 mm.

Contents of the shipment

1 x C.A. 1727 Tachometer

1 x 9 V Battery

1 x Set with 15 reflective bands (length of 0.1 m)

1x Tachograph software on CD-ROM

1 x User manual

1 x Quick start guide

1 x Transport case