Surface Tester PCE-CRC 10

$ 440.00

Pedido N° ref.: PCE-CRC 10

Shipping: throughout Latin America Delivery time: Inquire

See PCE surface tester See Tester in other brands

View products PCE Buy

Surface tester PCE-CRC 10 To check the adhesion of coatings / Ideal for fine, thick, and hard coatings / With a large non-slip handle / Interchangeable blades / With a movable head / Robust and comfortable design
The PCE-CRC 10 surface tester has been designed to check the quality of the adhesion of coatings. You can use the surface tester on any type of surface with fine, thick, or hard coatings. The adhesion of paints and other coatings is a production and quality characteristic that determines their protective effect. This is why the surface tester is used in many sectors of the industry. The surface tester allows for quick and easy adhesion checks. Simply scratch the coating in a cross pattern, which will cause it to fragment in a checkerboard manner. The large non-slip handle and movable head ensure a secure cut without twisting. Then, an adhesive tape is placed and removed again. Depending on the number of fragments that stick to the adhesive tape, you can determine the adhesion of the coating. When ordering the surface tester, please specify the type of blade you want. The fields of use for the surface tester include the paint, varnish, and plastics industry, the material processing industry, and any product that needs to be coated. The surface tester is also suitable for manufacturers of signaling materials and for applicators. With the PCE-CRC 10 surface tester, you can cut coatings of any thickness and any type of substrate.
- Adhesion testing - For fine, thick, and hard coatings - Mango antideslizante - Selection of blade type	- Cuchillas intercambiables - Mobile head - Very robust and comfortable design - Includes transport case
Technical specifications
Measurement range	For thicknesses up to 60 µm
Number of teeth.	6 or 11 (depending on model)
Cut-off distance	1 ... 3 mm (depending on model).
When using the surface tester, you can make cuts at an angle of 30° degrees (Method A) or perpendicular (Method B) so that the cut forms a cross or an X. These testing methods can be used to qualify coatings as suitable or unsuitable. In multilayer systems, you will need to check the adhesion of each layer in parallel.
Selection of the appropriate cross-cutting method
- Method A (X-cut): for checks according to ASTM D 3359 with thickness > 125 µm - Method B (cross-cutting): for checks according to ISO 2409 standard with thickness between 0 and 250 µm and ASTM D 3359 with thickness < 125 µm
Selection of the appropriate cutting distance (for method B)
According to standard EN DIN ISO 2409

Layer thickness	Substrate type	Distance between teeth
0 ... 60 µm	Duro	1 mm
0 ... 60 µm	Blando	2 mm
more than 60 ... 120 µm	Hard or soft	2 mm
more than 120 ... 250 µm	Hard or soft	3 mm
According to ASTM D 3359 standard
Layer thickness	Distance between teeth
0 ... 50 µm	1 mm
50 ... 125 µm	2 mm
Contents of the shipment
1 x Surface Tester PCE-CRC 10 1 x Allen key for changing the blade 1 x Brush to remove particles 1 x Cinta adhesiva 1 x Instruction Manual