Roughness Meter PosiTector SPG

roughness meter on surfaces / measurement range Ra and Rz / LCD display with backlight / sensor made with diamond / RS232C interface

The surface roughness gauge PCE-RT 10 is a small, lightweight device with very simple handling. Although the surface roughness gauge operates at a very complex and sophisticated level, measurement results can be obtained very easily and comfortably. Thanks to its high durability, the surface roughness gauge has a long service life. This roughness gauge complies with standards according to ISO, DIN, ABSI, and JIS. The surface roughness gauge can be applied in various mechanical manufacturing processes as control equipment. The device indicates all calculated measurement results on its LCD screen at any time. To measure the roughness of a surface, the sensor must be placed on that surface. Subsequently, the sensor samples uniformly across the surface along the guide. The surface roughness gauge will then calculate the measurement values. Measurement values are obtained by moving the sensor while inducing current. The fast DSP processing allows immediate display of measurement values on the LCD screen. Through the integrated RS232C interface, the roughness gauge can be connected to a PC. The appropriate interface cable for connection to a PC is available as an accessory.

- Measurement range Ra and Rz

- Induction principle

- Pantalla LCD retroiluminada

- With threshold function

- Easy to handle

- Interfaz RS232C

- Diamond sensor

- Low fluctuation on display

Technical specifications

Measurement range

Ra

Rz

0,05 ... 10 µm / 1 ... 400 µinch

0,02 ... 100 μm / 0,78 ... 40 µinch

Accuracy

General

±10 %

Fluctuation on the screen

Max. 5 %

Resolution

Measurement range < 10 μ

0,001 μ

Measurement range < 100 μ

0,01 µ

Measurement range ≥ 100 μ

0,1 µ

Sensor

Type of measurement

Induction principle

Sensor radius

10 µm

Sensor material

Diamante

Measurement of sensor force

16 mN (1.6gf)

Sensor angle

90 °

Vertical radius of the probe head

48 mm

Measurement speed

Sampling length: 0.25

Vt = 0.135 mm/s

Sampling length: 0.8

Vt = 0.5 mm/s

Sampling length: 2.5

Vt = 1 mm/s

Retorno

Vt = 1 mm/s

General technical specifications

Maximum core

2.5 mm / 0.5 inch

Frequency length limit

0.25 mm / 0.8 mm / 2.5 mm optical

Unidades

Rz, Ra

Pantalla

4-digit LCD display, with backlight

Maximum ambient temperature

0 ... +50 °C

Maximum ambient air humidity

< 80%

Diameters

125 x 80 x 30 mm

Peso

280 g

Contents of the shipment

1 x Surface roughness meter PCE-RT 10

1 x Calibration standard

1 x Destornillador

1 x Instruction Manual