Network and Supply Quality Analyzer

Network analyzer / The powerful instrument for standard applications covers basic operation with easy use for the customer

The MAVOWATT 30 three-phase network and energy analyzer complies with the relevant standards for network quality testing, EN50160, EN61000-4-7, EN61000-4-15, as well as the EN61000-4-30 standard, which specifies the measurement procedures to determine voltage quality. 

Class A equipment simultaneously monitors effective values, harmonics, flicker and transients up to approximately 80µs. 

The MAVOWATT 30 offers 8 measurement channels (4 x voltage and 4 x current). The configuration and current circuit are automatically determined from the applicable measurement values. The monitoring mode can be easily adjusted with the automatic limit value definition option. The recorded data is saved on a CompactFlash card. The MAVOWATT 30 offers an intuitive color operator interface with icons and data communication via RS232, Ethernet, or USB. Available user languages: German, English, French, Spanish, Italian, Swedish, Finnish, Japanese, Chinese, and Korean.

- Power and energy analysis in power supply networks

- Harmonic analysis, according to EN 61000-4-7

- Quality of networks, according to EN 50160 with bar chart

- Flicker analysis, according to EN 61000-4-15

- 8 measurement inputs, 4 x voltage (differential), 4 x current (current transformer), 

  for frequencies of 50/60 Hz and 16 2/3 Hz.

- CompactFlash memory card of 4... 32 GB

- Power supply by charger 90...264 V/47...63 Hz

- Integrated battery with a capacity of 3h

- RS232, USB or Ethernet interface (optional)

Technical specifications

Measured Parameters

4 differential inputs, 1-600 Vrms, AC/DC, 0.1% rdg, 256 samples/cycle, 16 bit ADC

4 inputs with CTs 0.1-6000 Arms CT-dependent, 

AC/DC, 0.1%rdg + CTs, 256 samples/cycle, 16 bit ADC

Frequency Range 45-65 Hz and 15-20 Hz

Phase Lock Loop - Standard PQ mode

Monitoring/Compliance

EN50160 Quality of Supply / IEC 61000-4-30 Class A / IEEE 1159

Long Term Monitoring / Continuous Data Logging w / min / max / avg

Power Quality Triggers

Cycle-by-cycle analysis

256 samples/cycle; 1/2 cycle RMS steps

L-L, L-N, N-G RMS Variations: Sags/swells/interruptions

RMS Recordings V & I (32 pre-fault, 10K post-fault cycles)

Waveshape Recordings 2 / 6 / 2 cycles

Low and Medium Frequent Transients - V & I

Harmonics Summary Parameters

Cross Trigger V & I Channels

RMS Event Characterization IEEE or IEC

Distortion/Power/Energy

W, VA, VAR, TPF, DPF, Demand, Energy, etc.

Harmonics THD / Harmonic Spectrum (V,I,W), Interharmonics TID / 

Interharmonic Spectrum (V,I) to 63rd per IEC 61000-4-7

Flicker Pst, Plt, Sliding Plt per IEC 61000-4-15

Crest Factor, K Factor, Transformer Derating Factor, Telephone Interference Factor

Unbalance (max. rms deviation) & sequencing components

Available Languages

English, French, Italyn, German, Spanish, Swedish, Finnish, Chinese (simplyfied), 

Chinese (traditional), Japanese, Korean

General Specifications

Size: 12“ x 2.5“ x 8“ (30cm x 6.4cm x 20.3 cm), Weight: 4.2 pounds (1.9 kg)

Operating Temperature: 0 -50 (32 to 122 ), Storage Temperature: -20 to 55 (4 to 131 F), 

Humidity: 10 to 90% non-condensing

System Time Clock-Crystal controlled-1 second resolution

Charger / Battery Eliminator: 90-264 VAC 47-63 Hz Display:

LCD color touch screen

Memory options (must have one): 32M-256M removable compact flashcard

Contents of the shipment

1 x Equipo base Mavowatt 30

1 x Set of measurement cables

1 x Acumulador + cargador

1 x Tarjeta Compact flash 4 GB

1 x Calibration certificate

1 x Software DranView 6 Pro

1 x Transport case

1 x User manual