Installation Tester Profitest MXTRA

Profitest MXTRA installation tester

total voltage range 65... 550 V / total frequency range 15.4... 420 Hz / 

Sine characteristic / temperature range 0... 40 ºC / battery voltage 8... 12 V

The installation tester with a wide range to quickly and effectively verify installations and AC systems and three-phase networks with voltages from 65 to 500 V and frequencies from 16 to 400 Hz. Loop impedance and network impedance measurements can be performed with the installation tester in the range of 65 to 500 V.

- Display of fuse types.

   admissible for electrical installations

- Start test of counters

- Determine the length of copper cables

  with common sections

- Measurement of polarity, leakage and

  current compensation up to 1 A and

  working current up to 150 A with sensor

  of clamp WZ12C

- Phase sequence measurement (sequence

  of phases, higher line voltage)

- Contact voltage measurement without

  disparar el interruptor diferencial

- Contact tension test relative to the

  corriente nominal residual, aplicando 1/3

  part of the nominal residual current

- Residual current shot test,

   measure the operating time

- Failure notice

- Battery control and testing

- Interfaz RS232

Technical specifications

Mediciones RCD

UB without tripping the RCD switch

Trigger time

IF trigger current

Selective protection, SRCD, PRCD, type G/R

Type B RCD, B+, AC/DC current and three-phase, EV/MI

Isolation monitoring devices (IMD)

Differential current monitoring devices (RCM)

Test by inversion N-PE

Measurement of loop impedance ZL-PE / ZL-N

Fuse table, networks without RCD

No RCD switch tripping, fuse table

Test current 15 mA1), without RCD tripping

Ground resistance

Ground resistance RE (mains power) Method I/U (measurement of 2/3 poles with 2/2 pole adapter + probe)

Ground resistance RE (battery operation) Measurement of 3 or 4 poles with PRO-RE adapter

Specific ground resistance ρE (battery operation) (4-pole measurement with PRO-RE adapter)

Selective ground resistance RE (mains power) with 2-pole adapter, probe, grounding, and clamp ammeter (3-pole measurement)

Selective ground resistance RE (battery operation) with probe, grounding, and clamp ammeter (4-pole measurement with PRO-RE adapter and clamp ammeter)

Ground loop impedance RESCHL (battery-operated) directly with clamp ammeters or with clamp-type transformers and PRO-RE/2 adapter

Equipotential protection RLO

Automatic polarity reversal

Insulation resistance RISO

Test voltage or slope variable (Ramp)

Test voltage variable or slope

Voltage

UL-N / UL-PE / UN-PE / f

Medidas especiales

Leakage current (with clamps) IL, IAMP

Phase sequence

Resistencia a tierra RE(ISO)

Voltage drop

Local insulation impedance ZST

Start meter

Sí

Sí

Sí

Sí

Sí

Sí

PRO-AB leakage current power adapter

Residual voltage test

Rampa inteligente

Equipamiento

Multiple user languages

Memory (database for up to 50000 objects)

Programmed test sequences

RFID interface/barcode reader RS232

USB communication interface

Bluetooth interface

ETC software for PC

Measurement category  

CAT III 500 V / CAT IV 300 V

Technical features

Rangos nominales

Voltage UN

120 V (108... 132 V)

230 V (196... 253 V)

400 V (340... 440 V)

Frecuencia fN

16 2/3 Hz (15,4... 18 Hz)

50 Hz (49,5... 50,5 Hz)

60 Hz (59,4... 60,6 Hz)

200 Hz (190... 210 Hz)

400 Hz (380... 420 Hz)

Total voltage range U_Y

65... 550 V

Total frequency range.

15,4... 420 Hz

Feature

Senoidal

Temperature range

0 ... 40 °C

Power supply voltage

8... 12 V

Network impedance angle

Correspondiente a cosφ = 1... 0,95

Resistencia sonda

< 50 kΩ

Contents of the shipment

1 x Installation tester

1 x Schuko insert (according to the specific country standards)

1 x 2-pole measurement adapter and

1 x 3-pole extension cable (PRO-A3-II)

2 x Pinzas tipo cocodrilo

1 x Carrying strap

1 x Rechargeable batteries Akku-Pack (Z502H)

1 x Z502R type battery charger

1 x DAkkS calibration certificate

1 x USB interface cable

1 x Manual breve