You are here

3-Phase Amperemeter PCE

PCE-360 Three-Phase Amperemeter
$ 2,050.00
  • Brand : PCE
  • Model  : PCE-360
  • Current:1000A 
  • Voltage: 1000 AC/DC
  • Active power: 1000 Kw
  • Reactive power: 1000 Kvar
  • Apparent power: 1000 Kvar
  • Phase angle: 180º
  • Power factor: 1.00
  • Frequency: 100 Hz
  • Origin: GERMANY

 

The PCE-360 three-phase power ammeter (Power Analyzer) is used to measure power in one or three phases. To do this, its large screen presents up to 10 values. Up to 4 current clamps can be adapted at the same time. In manual mode the power ammeter can save 99 values ​​directly. In data logging mode, up to 20,000 values ​​can be saved, making this three-phase power ammeter ideal for long-term analysis. The values saved in the device can be transmitted to the PC for later evaluation....

View product

 
PCE-PA 8000 Amperemeter
$ 2,200.00
  • Brand : PCE
  • Model  :PCE-PA 8000
  • Current:1200A 
  • Voltage: 600 AC/DC
  • Active power: 1000 Kw
  • Reactive power: 1000 Kvar
  • Apparent power: 1000 Kvar
  • Phase angle: 180º
  • Power factor: 1.00
  • Frequency: 65 Hz
  • Origin: GERMANY

 

The PCE-PA 8000 ammeter allows you to measure and record the power of a single-phase or three-phase circuit. With the ammeter you can make long measurements. The measurement values ​​are stored on an SD card in xls format. This allows measurement values ​​to be analyzed conveniently on the computer. The measurement rate can be freely adjusted between 2 and 7200 seconds. The ammeter is also capable of performing energy measurements as well as determining power factor and phase angle......

View product

 
PCE-830 Amperemeter
$ 3,150.00
  • Brand : PCE
  • Model  :PCE-830
  • Current:3000A 
  • Voltage: 600 AC/DC
  • Active power: 1000 Kw
  • Reactive power: 1000 Kvar
  • Apparent power: 1000 Kvar
  • Phase angle: 180º
  • Harmonic distortion: 100%
  • Power factor: 1
  • Origin: GERMANY

 

The PCE-830 ammeter (Power and Harmonics Analyzer) is used to measure one to three phases of electrical magnitudes in the alternating current network. In addition to detecting "normal" measurement quantities such as voltage, current, frequency, power and energy, it also indicates, according to EN50160, harmonic, interharmonic and asymmetric values. Interferences in the network such as interruptions, thefts, temporary surges or transients (from 16 µs) are detected with their corresponding values. The LCD display, which features good contrast and a backlit dot matrix, shows you up to 35 parameters simultaneously......

View product