PCE Analog Durometer

• Brand: PCE
• Model:PCE-A
• Range: 0 to 100
• Penetration body: 35°
• Standard: DIN 53505 
• 35º (according to Shore A)
• Origin: Germany

The durometer is the standard model for measuring the hardness of rubber (Shore A). The durometer consists of a measuring device with measuring head and a 360° anti-glare watch with a reading accuracy of 0.5 hardness units.). ...

View product

• Brand: PCE
• Model:PCE-D
• Range: 0 to 100
• Penetration body: 35°
• Standard: DIN 53505 
• 35º (according to Shore D)
• Pressure: 50N
• Origin: Germany

El  Durometer is a standard model for measuring the hardness of hard rubber (Shore D). The durometer consists of a measuring device with a measuring head and a 360° anti-glare watch with a reading accuracy of 0.5 hardness units. Complies with DIN 53505, ISO 868, ISO 7619 and ASTM D 2240 standards....

View product

• Brand: PCE
• Model: PCE-A-S
• Range: 0 to 100
• Penetration body: 35°
• Standard: DIN 53505 
• 35º (according to Shore A)
• Pressure: 12.5N
• Origin: Germany

This durometer is a standard model for measuring the hardness of rubber (Shore A). This durometer consists of a measuring device with a measuring head and a 360° anti-glare watch with a reading accuracy of 0.5 hardness units. Complies with all these standards DIN 53505, ISO 868, ISO 7619 and ASTM D 2240. The durometer is shipped calibrated with ISO calibration certificate included. The device can be recalibrated again at any time accompanied by an ISO laboratory certificate (additional cost). ....

View product

• Brand: PCE
• Model: PCE-D-S
• Range: 0 to 100
• Penetration body: 30°
• Standard: DIN 53505 
• Pressure: 50 N
• Origin: Germany

The durometer is a standard model for measuring the hardness of hard rubber (Shore D). The durometer consists of a measuring device with a measuring head and a 360° anti-glare watch with a reading accuracy of 0.5 hardness units. Complies with DIN 53505, ISO 868, ISO 7619 and ASTM D 2240 standards. The durometer is shipped calibrated with ISO calibration certificate included. The device can be recalibrated again at any time accompanied by an ISO laboratory certificate (additional cost). ...

View product

• Brand: PCE
• Model: PCE-O-S 
• Range: 0 to 100
• Penetrating body: 3 / 32 "
• Standard: ASTM D 2240 
• Pressure: 12.5N
• Origin: Germany

El Durometer is a standard model for measuring the hardness of soft elastomers and textile fabrics (Shore O). The hardness tester consists of a measuring device with a measuring head and a 360° anti-glare watch with a reading accuracy of 0.5 hardness units. Complies with ASTM D 2240. The durometer is shipped calibrated with ISO calibration certificate included. The device can be recalibrated again at any time accompanied by an ISO laboratory certificate (additional cost). ...

View product

• Brand: PCE
• Model: PCE-AL 
• Range: 0 to 100
• Penetrating body: 35°
• Standard: ASTM D 2240 
• Pressure: 1000g 
• Origin: Germany

El Durometer is a standard model for measuring the hardness of soft elastomers and textile fabrics (Shore O). The hardness tester consists of a measuring device with a measuring head and a 360° anti-glare watch with a reading accuracy of 0.5 hardness units. Complies with ASTM D 2240. The durometer is shipped calibrated with ISO calibration certificate included. The device can be recalibrated again at any time accompanied by an ISO laboratory certificate (additional cost). ...

View product

• Brand: PCE
• Model: PCE-DL  
• Range: 0 to 100
• Penetrating body: 30 °
• Standard: ASTM D 2240 
• Pressure: 5000g 
• Origin: Germany

The Shore hardness meter with a fine probe and a small Ø 8 mm support surface is used to measure in hard-to-reach places or irregular surfaces. The Shore hardness meter has been developed to measure the hardness of rubbers, plastics, elastic materials, textiles, printing rollers, etc.....

View product