Water Distiller with Reservoir GFL 2008

• Brand            :   GFL
• Model          : 2008
• Capacity : 8 Liters/Hour
• Conductivity: 2,3 µs / cm
• Origin: GERMANY

GFL water stills are the result of decades of experience and technical progress. They produce very pure, low gas, bacteria, and pyrogen-free distilled water with very low conductivity. They comply with DAB regulations and the requirements of the international pharmacopoeia. All GFL water stills operate economically due to the heated cooling water distillation, are reliable, maintenance-free, easy to operate and service, and carry the CE mark. The built-in storage tank accepts double the hourly capacity of the unit. GFL water stills are used in research and development, for example for the preparation of bacteriological and medical samples, for cell and tissue cultures, as well as for the production of reagents and ointments. Furthermore, distilled water is used for cleaning and sterilization processes, for buffered solutions, as well as for microbiological and analytical applications. Water distiller for simple distillation (fully automatic) with storage tank, suitable for both bench and wall mounting. Very good quality distillate; approx. conductivity. 2.3 S/cm at 25 °C. The distillate storage tank accepts double the hourly capacity of the still.

• Electronic level switch disconnects even when the storage tank is full and automatically restarts when distilled liquid is removed.
• Electronic dirt control changes the unit in case of high-grade impurities in the water in the evaporator, the red pilot light "Clean" will illuminate.
• Low water cut thermostat.
• Economical energy consumption for distilling heated cooling water.
• Savings through automatic water cut-off. Unnecessary water consumption will be avoided.
• Easily accessible evaporator for cleaning purposes.
• Condenser (cooling coil) inside the storage tank, easily interchangeable.
• Withdrawal of distillate through drain valve with continuous position and touch.
• CO 2 Degassing through the outlet in the condenser.
• The heating element, evaporator, condenser, and stainless steel storage tank.
• Double-walled casing. The outer housing is made of electrolytically galvanized steel sheet, coated with electrostatic epoxy resin.
• Water supply through a system built into the solenoid valve with a connection for 1/2" pressure hose (approx. inner diameter 12.7 mm).
• Coolant water outlet with 3/4 " hose connection (ø approx. 19.0 mm).
• Hoses for water in- and outflow are available as an accessory. 

 

Technical data
	Power	8 l / h
	Conductividad	aprox. 2,3 µs / cm a 25 °C*
	Tank capacity	16 l
	Cooling water required	aprox. 72 l / hora
	Required pressure of cooling water	from 3 bar to max. 7 bar
	Dimensions exteriores (A x P x H)	780 x 410 x 540 mm
	Electrical connection	400 V / 50...60 Hz / 6.0 kW 3 Ph/N/PE three-phase current**
	Net weight	aprox. 30,7 kg
	Gross weight (cardboard box)	aprox. 41,0 kg
	Gross weight (wooden box)	aprox. 50,0 kg
	Packaging volume	aprox. 0,34 m3

General catalog GFL

INCLUYE