$ 15,000.00
|
|
PRECIO : Dolares Americanos
|
||||||
|
Memmert oven of 750 L, model IN 750 plus
Standard shipping paragraph Incubators
The heating system of this incubator is optimally adjusted for both natural convection and forced air circulation systems. For this reason, the fan can be completely turned off to heat very valuable loads with special care in the pharmaceutical, medical, research, and food chemistry sectors.
IF30plusIF30plus
Ventilation and Control
the forced air circulation by air turbine is quite adjustable in 10% steps for each segment individually
Preheating adjustment for fresh air mixing by controlling the air valve in 10% steps for each individual segment
Ventilate the connection with a restrictor flap
Adaptable multifunctional digital PID controller on a microprocessor with 2 high-definition full-color TFT display
self-diagnosis for fault analysis
2 class A Pt100 sensors in 4-wire circuit, tracking and taking over the performance at the same temperature value mutually
Digital reverse counter with target time adjustment, adjustable from 1 minute to 99 days
adjustable parameters in ControlCOCKPIT: temperature (degrees Celsius or Fahrenheit), fan speed, air valve position, program time, time zones, daylight saving time / winter
SetpointWAIT Function - the process time does not start until the set temperature is reached
Language settings ControlCOCKPIT: German / English / Spanish / French
Display resolution of setpoint and actual temperature values 0.1 °C
Calibration installation directly in ControlCOCKPIT for three freely selectable temperature values
program stored in case of power failure
fixed sterilization program (4 hours / 160 ° C) for sterilizing the working chamber, not for sterilizing the load
incl. works calibration certificate of + 37 °C
Multiple over-temperature protection
with visual and audible alarm
TWW over-temperature monitor, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on the screen
also integrated excessive and sub-temperature monitor "ASF", automatically following the setpoint value within a pre-established tolerance range, alarm in case of excess or sub-temperature, heating disconnects in case of excess temperature
Mechanical temperature limiter TB, protection class 1 according to DIN 12880 standard to turn off heating approx. 20 °C above nominal temperature
Stainless steel covered texture
w x H x D: 1224 x 1726 x 784 mm
fully insulated stainless steel doors with
2 points (compression door lock) locking
interior glass doors
acero galvanizado trasera
with lockable wheels
Interior - Heating concept
w x H x D: 1040 x 1200 x 600 mm, 749 l
easy to clean interior, stainless steel, reinforced by deep drawn ribs with integrated large surface heating and protected on all four sides
2 stainless steel grids
Max. chamber load: 300 kg
Temperature range
min. 5 ° C above ambient up to + 80 ° C
Voltaje / Power nominal
230 V (+/- 10%), 50/60 Hz / aprox. 2.000 W
115 V (+/- 10%), 50/60 Hz / aprox. 1.800 W
packaging data
peso neto aprox. 217 kg
carton gross weight approx. 288 kg
Dimensions aprox .:
cardboard w x H x D: 133 x 192 x 105 cm
The devices must be transported in an upright position.
Customs number
8419 8998
Country of origin
Federal Republic of Germany
WEEE-Reg.-No.
DE 66812464
INCLUYE
CONTACTENOS: 24 hours for sales, maintenance, calibration, certification...
"Equinlab SAC contributes to the development and innovation of new technologies in Peru"
|
|
contact with the import area through 
Price: $ 15,000.00